Czech
Danish
Dutch
English
French
German
Italian
Norwegian
Portuguese
Romanian
Russian
Spanish
Swedish
Turkish
 
Position:Home
Related Links

Tungsten alloy is generally refractory metal, which have two-phase composites consisting of W-Ni-Fe or W-Ni-Cu or even W-Ni-Cu-Fe. Co, Mo, Cr, and other elements are added in some tungsten alloy. It could be made as various shapes, such as rod, cube, block, brick, ring, etc.

Usually, Tungsten alloy could be manufactured as the parts of military defense, extrusion die, some counterweights, such as yacht counterweights, vehicle counterweights, airplane counterweights, helicopter counterweights, boat counterweights, tank counterweights, etc.

Marketable products
Tungsten alloy material
Tungsten heavy alloy generally are refractory metal, which have two-phase composites consisting of W-Ni-Fe or W-Ni-Cu or even W-Ni-Cu-Fe, some tungsten alloy is added Co, Mo, Cr, etc. It could be made as various shapes, such as rod, cube, block, brick, ring, etc.
Tungsten alloy rod
1, Diameter: 2.0-100.0mm
2, Length: 50-1000mm
3, Density: 16.5-18.75 g/cm3
4, Composition: W content: 85-99%, W-Ni-Fe, W-Ni-Cu
5, Surface: Sintering surface, Forged surface, Ground surface
Tungsten alloy plate
1, width×Length: (2.0-250.0mm)×(2.0-250.0mm)
2, thickness: 2mm-15mm
3, Density: 15.8-18.75 g/cm3
4, Composition: W content: 85-99%, W-Ni-Fe, W-Ni-Cu
5, Surface: Sintering surface, Forged surface, Ground surface
Tungsten rod
1, Grade: W1, W2, W3, W4
2, Diameter: 2.0-100.0mm
3, Length: 50-1000mm
4, Density: 19.2g/cm3
5, Surface: Sintering surface, Forged surface, Ground surface
Tungsten wire
1, Diameter: 0.01mm~2.00mm
2, Grade: W1, W2, WAL1, WAL2, WAL3
3, Density: 19.2g/cm3
4, Purity 99.92%, 99.98% can also be achieved if special demanded.
5, Specific electrical: 0.055 Ohm x mm2/m resistance at 20 °C.
6, Modulus of elasticity: 410 kN/mm2, at 20 °C.
Tungsten targets
1, Material: Tungsten
2, Size: Thinness (<20mm) x="" width=""><300mm) x="" length="">
3, Condition: ground
4, Application: PVD coating industry, x-ray tube and so on.
Copper tungsten rod
1, Diameter: 1.5-100.0mm
2, Length: 50-1000mm
3, Density: 12.60-17.05 g/cm3
4, Composition: W 55-90%, Cu 10-45%
5, Surface: Sintering surface, Forged surface, Ground surface
Silver tungsten material
Silver tungsten materials are used in industrial and domestic circuit breaker applications where good weld and erosion resistance is important. Various grades are available: - the higher silver grades have higher conductivity, and the higher tungsten grades have greater erosion and weld resistance.
Tungsten electrode material
1, Diameters: 1.0mm-10.0mm
2, Length: 150mm, 175mm
3, We also accept orders of special specification Tungsten electrode.
Tungsten electrode product is the traditional and advantages product in our Factory. In recent years, the factory began to the tungsten electrode product research and development
Molybdenum material
Molybdenum material are used in the following industries: glass melting, vacuum furnace, vacuum deposition, aerospace, solar,nuclear, electronics,automotive, and medical.
We carry molybdenum in wire, rod, sheet, and plate. We also sellmolybdenum nuts, bolts, heat shields, and other hardware for vacuumfurnace and high vacuum environments.
Tungsten alloy radiation shielding
Experts find that radiation exposure could be reduced by maxing shielding. The density of a material is related to its radiation stopping ability. Higher density means better stopping power and shielding. Due to a higher density, tungsten alloy has a much higher stopping power than lead. Its greater linear attenuation of gamma radiations means that less is required for equal shielding. Alternatively equal amounts of tungsten alloy shielding provide diminished exposure risks than equivalent lead shielding.
Tungsten alloy shot
Tungsten alloy shot is used as the shot of shotgun, hunting sphere. A shotgun is a firearm that is usually designed to be fired from the shoulder. The shot pellets from a shotgun spread upon leaving the barrel, and the power of the burning charge is divided among the pellets, which means that the energy of any one ball of shot is fairly low.
Language: | český | danske | Nederlands | English | française | Deutsch | italiano | norske | português | român | русский | español | Švédsky | Türk
Email : sales@chinatungsten.com
Copyright©2001 - 2011 CTIA E-biz Center All Rights Reserved