Molybdenum rod

Molybdenum rod introduction

1, Diameter: 1.0-100.0mm
2, Length: 50-2000mm
3, Density: 10.15g/cm3
4, Purity 99.95%, 99.98% can also be achieved if special demanded.
5, Surface: Sintering surface, Forged surface, Ground surface
6, Applications: Used for making electric vacuum device and electric light source parts, etc.

Molybdenum rod divided forging molybdenum rod and polished molybdenum rod; forging molybdenum rod surface is allowed to have oxidize film and slight forging hammer mark; polished molybdenum rod surface presents metallic luster and has no oxidized phenomenon notably; the two surfaces have no defects, such as divided layer, crackle, burr and vertical crackle, etc.

We produce pure and lanthanide doped molybdenum rod. The lanthanide doped molybdenum rods are targeted for use in higher temperature applications where ductility is retained after recrystallization for material with smaller cross sections.

Grade of molybdenum rod material

Grade		Mo-1	Mo-2	Mo-3
Mo(%)≥		99.95	99.95	99.92
Other Element Cont (%)≤	Pb			0.001
	Bi			0.001
	Sn			0.001
	Sd			0.001
	Cd			0.001
	Fe	0.005	0.006	0.030
	Ni	0.002	0.001	0.005
	Al	0.002	0.002	0.005
	Si	0.003	0.001	0.010
	Ca	0.002	0.002	0.004
	Mg	0.001	0.001	0.003
	P	0.001	0.001	0.002
	C	0.005	0.003	0.010
	O	0.003	0.005	0.008
	N	0.001	0.001
Use for example		Drawing Molybdenum wire	Spraying Molybdenum wires	High Temperature Components

Molybdenum rod

Molybdenum rod introduction

Grade of molybdenum rod material

Related Links