Tungsten alloy vibrator

Application for tungsten heavy alloy in vibrator

People find tungsten heavy alloy is excellent material for making this component. Since the density of tungsten alloy is so high and the maximum density should be 18.6g/cm3. It is popular for the component needs great heaviness but small capacity, for example: the vibrating parts of and clock, etc.

Clock vibration parts are one of our leading products. Compared with other materials, tungsten alloy vibrators bear the advantages of accurate weight, and non-magnetism. In particular, since a motorized weight usually produces the vibrations, lighter-weight phones may have weaker vibrating mechanisms.

Whenclock vibrates, there is an eccentric motion, which is caused by eccentric motor with vibrating components. As the center of the gravity is eccentric, and is not in the rotor of motor, then the clock vibrates. In this case, machinery component with good properties of wear resistant and high specific gravity is required.

Tungsten Alloy Data Sheet

Type	Density (g/cm³)	Tensile strength (MPa)	Elongation	Hardness (HRC)
85W-10.5Ni-4.5Fe	15.8-16.0	700-1000	20-33	20-30
90W-7Ni-3Fe	16.9-17.1	700-1000	20-33	24-32
90W-6Ni-4Fe	16.7-17.0	700-1000	20-33	24-32
91W-6Ni-3Fe	17.1-17.3	700-1000	15-28	25-30
92W-5Ni-3Fe	17.3-17.5	700-1000	18-28	25-30
92.5W-5Ni-2.5Fe	17.4-17.6	700-1000	25-30	25-30
93W-4Ni-3Fe	17.5-17.6	700-1000	15-25	26-30
93W-4.9Ni-2.1Fe	17.5-17.6	700-1000	15-25	26-30
93W-5Ni-2Fe	17.5-17.6	700-1000	15-25	26-30
95W-3Ni-2Fe	17.9-18.1	700-900	8-15	25-35
95W-3.5Ni-1.5Fe	17.9-18.1	700-900	8-15	25-35
96W-3Ni-1Fe	18.2-18.3	600-800	6-10	30-35
97W-2Ni-1Fe	18.4-18.5	600-800	8-14	30-35
98W-1Ni-1Fe	18.4-18.6	500-800	5-10	30-35
90W-6Ni-4Cu	17.0-17.2	600-800	4-8	25-35
93W-5Ni-2Cu	17.5-17.6	500-600	3-5	25-35

Tungsten alloy vibrator

Application for tungsten heavy alloy in vibrator

Tungsten Alloy Data Sheet

Related Links