Tungsten alloy cylinder
1, Diameter: 2.0-100.0mm
2, Length: 50-1000mm
3, Density: 16.5-18.75 g/cm3
4, Composition: W content: 85-99%, W-Ni-Fe, W-Ni-Cu
5, Surface: Sintering surface, Forged surface, Ground surface
Tungsten heavy alloys generally are refractory metal, which have two-phase composites consisting of W-Ni-Fe or W-Ni-Cu or even W-Ni-Cu-Fe, some tungsten alloy is added Co, Mo, Cr, etc. It could be made as various shapes, such as rod, cube, block, brick, ring, etc.
Usually, tungsten alloy cylinder could be manufactured as the parts of military defense, extrusion die, some counterweights, such as yacht counterweights, vehicle counterweights, airplane counterweights, helicopter counterweights, boat counterweights, tank counterweights, etc.
Tungsten Alloy Data Sheet
|
Type |
Density (g/cm³) |
Tensile strength (MPa) |
Elongation |
Hardness (HRC) |
| 85W-10.5Ni-4.5Fe | 15.8-16.0 | 700-1000 | 20-33 | 20-30 |
| 90W-7Ni-3Fe | 16.9-17.1 | 700-1000 | 20-33 | 24-32 |
| 90W-6Ni-4Fe | 16.7-17.0 | 700-1000 | 20-33 | 24-32 |
| 91W-6Ni-3Fe | 17.1-17.3 | 700-1000 | 15-28 | 25-30 |
| 92W-5Ni-3Fe | 17.3-17.5 | 700-1000 | 18-28 | 25-30 |
| 92.5W-5Ni-2.5Fe | 17.4-17.6 | 700-1000 | 25-30 | 25-30 |
| 93W-4Ni-3Fe | 17.5-17.6 | 700-1000 | 15-25 | 26-30 |
| 93W-4.9Ni-2.1Fe | 17.5-17.6 | 700-1000 | 15-25 | 26-30 |
| 93W-5Ni-2Fe | 17.5-17.6 | 700-1000 | 15-25 | 26-30 |
| 95W-3Ni-2Fe | 17.9-18.1 | 700-900 | 8-15 | 25-35 |
| 95W-3.5Ni-1.5Fe | 17.9-18.1 | 700-900 | 8-15 | 25-35 |
| 96W-3Ni-1Fe | 18.2-18.3 | 600-800 | 6-10 | 30-35 |
| 97W-2Ni-1Fe | 18.4-18.5 | 600-800 | 8-14 | 30-35 |
| 98W-1Ni-1Fe | 18.4-18.6 | 500-800 | 5-10 | 30-35 |
| 90W-6Ni-4Cu | 17.0-17.2 | 600-800 | 4-8 | 25-35 |
| 93W-5Ni-2Cu | 17.5-17.6 | 500-600 | 3-5 | 25-35 |
Related Links
Tungsten round bar
Material Safety Data Sheet of Tungsten Alloy
Material Safety Data Sheet of Tungsten Alloy (PDF)
Catalog of Tungsten Alloy Products (PDF)
sales@chinatungsten.com