Molybdenum plate

Material from .090 inches to 3 inches in thickness is classified as molybdenum plate. It is widely used in the construction of furnace tooling and parts and as a feed stock for the fabrication of parts for the electronics and semiconductor industries. Standard availability is described below.

The specification of molybdenum plate

Thickness	Max. Width	Max. Length
.090"	24"	110"
.125"	24"	80"
.250"	24"	40"
.500"	24"	24"
>.500"	24"

Molybdenum plate standard thickness tolerance

Thickness	.25" to 6"	6" to 12"	12" to 24"
.090"	± .005"	± .005"	± .005"
> .125	± 4%	± 4%	± 4%

Molybdenum plate standard width tolerance

Thickness	.25" to 6"	6" to 12"	12" to 24"
.090"	± .031"	± .031"	± .031"
> .125	± .062"	± 062"	± 062"

Molybdenum plate surface condition

Surface can be supplied in a shiny, matte, or as-rolled condition; dependent upon thickness and width parameters.

Heat treatment

Molybdenum flat products are rolled and annealed to provide the optimum condition for the desired end use.

Grade of molybdenum material

Grade		Mo-1	Mo-2	Mo-3
Mo(%)≥		99.95	99.95	99.92
Other Element Cont (%)≤	Pb			0.001
	Bi			0.001
	Sn			0.001
	Sd			0.001
	Cd			0.001
	Fe	0.005	0.006	0.030
	Ni	0.002	0.001	0.005
	Al	0.002	0.002	0.005
	Si	0.003	0.001	0.010
	Ca	0.002	0.002	0.004
	Mg	0.001	0.001	0.003
	P	0.001	0.001	0.002
	C	0.005	0.003	0.010
	O	0.003	0.005	0.008
	N	0.001	0.001

Note:

For greater thickness, plate products are normally limited to 40 kilograms maximum weight per piece.
We can supply molybdenum plate as per customers' requests.